tube support

英 [tjuːb səˈpɔːt] 美 [tuːb səˈpɔːrt]

网络  管座

化学



双语例句

  1. The flow and heat-transfer characteristics of a new type of heat-transfer enhancement element, namely, the twisted tape as the tube bundle support, are analyzed.
    分析了一种新型的传热强化元件&旋流片作为管间支撑物时的流动与传热特性。
  2. Application of water-seal curtain and tube well dewatering in support of deep foundation pit
    止水帷幕和管井降水在深基坑支护中的应用
  3. Engineering application and mechanical analysis on steel tube compound soil-nailing wall support in deep foundation pit
    深基坑钢管复合土钉墙支护的工程应用与力学机理分析
  4. Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates.
    管束式热交换器。管子分布。管底座钻孔直径。导向扇形块和支承板。
  5. Main products: oil tank, oil tube, oiler support, oil pump, oil applying wheel etc.
    产品主要结构:油箱、油管、安装支架、油泵总成及涂油轮等组成。
  6. Analysis on Influencing Factors to Stability Bearing Capacity of the Steel Tube Formwork Support with Couples and Study on Construction Measure
    扣件式钢管支模架稳定承载力的影响因素分析与构造措施研究
  7. The open cavity is fixedly connected with handrail support tube and the front-wheel support tubes respectively via screws.
    所述开口空腔处分别是通过螺钉与扶手支撑管及前轮支撑管固定连接。
  8. The center distance of U-shape pipe should keep consistent with that of tube plate and support plate.
    U形管的中心距和管板、支持板的中心距必须保持一致。
  9. But now has not had to aim at the Concrete filled steel tube support specially the research in the aspect of calculation method, this has influenced Concrete filled steel tube support seriously popularize.
    但目前尚未有专门针对钢管混凝土支架计算方法方面的研究,这严重影响了钢管混凝土支架的推广应用。
  10. Development of Input Tube Support for Electrolyte
    电解液输液管支架的研制
  11. Conclusions: To early apply antibiotics, prevent and cure ventilator associated pneumonia, apply bronchofibroscope, strengthen the management air tube and nutritional support, and to positively treatment the raw surface of burn were effective treatments of pulmonary infection in patients of severe burn with inhalation injury.
    结论:早期合理应用抗生素,防治呼吸机相关性肺炎,应用纤维支气管镜检查及治疗,加强呼吸道管理和营养支持,积极处理创面都是治疗特重度烧伤伴吸入性损伤患者的肺部感染的有效方法。
  12. Casting of the Frame Type Tube Support for Ethylene-pyrolyzer Board
    乙烯裂解炉板框型管板的铸造
  13. Alignment of the Flow Distribution Baffle and the Tube Support Plates of the Steam Generator
    蒸汽发生器流量分配板和管子支撑板的对中
  14. Liquid Presses Tube of Support to Process Craft Improvement
    液压支架缸筒加工工艺改进
  15. The article discussed the bit shift and its control of cement-soil gravity retaining wall of a Zhuhai foundation ditch, the possibility of applying the light weight steel tube's inner shoring support to control the bit shift, and in turn elaborate its calculation method and construction techology.
    本文就珠海某基坑水泥土重力式挡土墙的位移及其控制进行分析探讨,论述了应用轻型钢管支撑对基坑位移控制的可行性,并详细阐述了其计算方法及施工工艺。
  16. An analysis for the impact force of an elastic tube with a clearance support
    与支承间存在间隙的弹性直管碰撞力的分析
  17. The design safety of steam generators in NPP is described, including selection of heat transfer tube material, support plate material and structural design, anti-vibration bar material and structural design, design of the joint between tube and tubesheet and the improving design of thermohydraulic structure.
    介绍了核电厂蒸汽发生器设计中应考虑的安全问题,包括传热管材料的选择、支撑板材料与结构设计、防振架材料与结构设计、管子与管板的连接和热工水力结构的改进设计。
  18. These turbulent characteristics of fluid flow for self-rotating self-cleaning twisted-tape-inserted tube will provide experimental support for the further theoretical research of convection heat transfer enhancement mechanism.
    流体的这些湍流特性的测得为自转塑料螺旋扭带管内对流传热强化机理的深入理论研究提供了实验支持。
  19. Analysis of heat transfer enhancement mechanism of new heat exchanger with twisted-leaf tube bundle support
    旋流网板换热器强化传热机理分析
  20. Comparison of respiratory mechanics during spontaneous breathing trial between automatic tube compensation and pressure support ventilation
    导管阻力补偿与压力支持通气对机械通气患者自主呼吸试验的影响
  21. The impacting force between tube and support plate is one of the parameters which plays a vital role in the prediction of tube fretting wear rate.
    影响管子磨损的因素很多,关键参数之一是管子一支承板间的碰撞力。
  22. Improvement of Positioning Procedure for Tube Sheets and Support Plates of Condensers
    凝汽器管板与隔板定位工艺的改进
  23. Comparison of work of breathing among continuous positive airway pressure ventilation, T tube and pressure support ventilation in patients
    持续气道正压通气、T管及压力支持通气等条件下患者呼吸功的比较性研究
  24. Objective To evaluate the effect of duodenum nutrition tube on nutrition support after Operation of Esophagus and Cardia Carcinoma.
    目的分析食管癌贲门癌患者术中放置十二指肠营养管进行早期肠内营养支持,对维持机体营养,促进恢复及预防并发症的作用。
  25. Structure and Fabrication of Lattice Tube Support in Heat Exchangers
    换热器格栅管撑结构及制造
  26. Objective To improve silicone tube which support PGA-cell material compound according to analysis of hydrodynamics to design a type of bio-reactor for tissue engineered blood vessel culture in vitro.
    目的根据流体力学的分析改进支撑PGA-细胞材料复合物的硅胶管,设计一种应用于体外培养组织工程血管的生物反应器。
  27. Through the renovation of membrane surface and control of key preparation technology, high-effective composite Pd membrane is formed by Al 2O 3 porous ceramic tube as the support.
    以氧化铝多孔陶瓷管做为支撑体,通过对其表面进行有效修饰和控制制备的技术关键,可以制备高效复合金属钯膜。
  28. The analysis and experimental study of impacting force of the tube against support plate in heat exchangers
    换热器传热管与支承板间碰撞力的分析和实验研究
  29. Cell sheet strategy together with silicone tube as external support provides a novel approach to construct tubiform bone graft.
    该策略为体外构建管状骨移植体提供了一个简单实用的方法。